阀 - 关于阀的双语例句 - 阀造句 - 语文书

为您找到103个与“阀”相关的双语例句：

User makes no physical contact with the Flushometer surface except initiate the Override Button when required.
除非确实需要启用强制冲水按钮,否则使用者与冲水阀表面不会发生身体接触.
Installation Template furnished with Flushometer.
随同冲水阀,附带安装模板.
Direct disc - to - liner seal between ECTFE fluoropolymer disc and TFM liner for positive shut - off.
在ECTFE含氟聚合物阀瓣与TFM内衬之间的直接阀瓣-内衬密封结构能够实现积极有效的关闭效果.
And theoretical basis is presented to further apply nozzle - flapper valve to two - stage electro - hydraulic servo valve .
较快的响应速度;为进一步将其应用于两级电液伺服阀提供了设计和实验依据.
Flange Insert valves are the ultimate check valves in flanged systems.
法兰插入式阀门是法兰阀门系列中最佳的止回阀.
Has a higher application temperature than Teflon & reg ; seated flanged ball valves.
比特氟隆阀座法兰球阀还高的应用温度.
ZPCJ flameproof type valve position transmitter.
ZPCJ隔爆式阀位传送器.
Type FP valves installed on emergency shower and eyewash station.
FP阀用于紧急淋浴和洗眼器.
Electrothermal head normally closed with switch contact ( 4 wires ).
热电阀,通常带有开关触头 ( 4根电缆 ).
The threshold comparative method in detecting electrospark discharging status is improved.
对检测电火花放电状态的阀值比较法作了改进.
This setup consists of a butterfly valve and a rotary electromechanical actuator.
这套装置由蝶阀和旋转电动驱动器组成.
Ventilation: positive downdraft exhaust ventilation should be provided to maintain vapor concentration below TLV.
通风: 为了使气体聚集程度维持在阀极限值之下,应提供通畅的向下棋流排气通风设施.
There are valve dither and valve set point circuit to improve the performance of the system.
为改善伺服阀的特性,在系统各通道的伺服输出电路中增加了可程控的阀偏置和阀颤振电路.
They secretly entered into collusion with the northern warlords.
他们喑中和北洋军阀勾结起来.
Phenolic Backed Seat: Non - collapsible, stretch resistant, blow out proof, field replaceable.
酚醛背衬阀座: 不可拆解, 抗拉伸,抗撞击.现场可更换.
A two piece packing gland prevents cocking and stem damage.
两件式填料压盖防止压盖翘起和阀杆损坏.
One of the reasons influencing CFB safe operations return valve clinkering blockage.
回料阀结焦堵塞是影响循环流化床锅炉安全运行的原因之一.
Inspect seats, clapper sealing surfaces, Check Arms, and O - rings for damage.
检查阀座、阀瓣密封面、止回阀臂和O形环是否有损坏.
Valves of the same figure number, but of different size get different CID numbers.
相同型号的阀门, 如果尺寸不同,其相应的CID编号也不同.
Minimum dimension from centerline of valve to handwheel when ordered without floorstand.
如果不订购地轴承架,则最小长度尺寸为阀门中心至手轮的长度.

|<<<1 2 345 >>>|