焊 - 关于焊的双语例句 - 焊造句 - 语文书

为您找到98个与“焊”相关的双语例句：

Joints between reinforcement members can be made satisfactorily with tin solder.
锡焊能够满意地做成加筋构件之间的接头.
Fewer workers are needed to solder circuit boards.
焊接电路板需要的工人更少了。
They will also be used on factory floors to weld things together.
它们也可用于工厂车间，用来焊接物体。
Where did you learn to weld?
你在哪儿学会的焊接技术？
Connector's solderability can meet MIL - STD - 202 F standard . Finish shall be free of contaminants.
产品可焊性符合 MIL -STD-202F标准规定的相关要求,表面不得有污染物.
The study demonstrates that the laser - MIG hybrid welding is an effective welding process for magnesium alloy.
因而激光?MIG复合焊接是镁合金焊接的一种有效方法.
Al - alloys have special requirements on MIG welding due to their unique physical and chemical properties.
铝合金因其独特的物理、化学性能对MIG焊有特殊的要求.
The causes of the wearable zone dropout were analyzed by the metallography analysis and SEM.
采用金相分析和扫描电镜分析方法,分析了钻杆接头喷焊耐磨带脱落原因.
A new type of maraging steel metal powder cored wire for die TIG surfacing is developed.
研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝.
A control system on chip microprocessor is designed for submerged arc welder with magnetrol power source.
针对磁放大器式电源埋弧自动焊机设计了单片机控制系统.
It is infrequence in China that the weld high - temperature high - pressure hydrogenation pipe is cracked short time.
高温高压临氢管道焊缝迅速发生裂纹,国内罕见.
Thirdly, the seam - tracking harmonically controlling algorithm of robot is designed.
第三, 设计了机器人焊缝跟踪协调控制算法.
Study of Wear - resistant and Abrasion Mechanism of Co - Cr - W Hardfacing Alloys.
Co-Cr-W堆焊合金耐磨性及耐磨机理的研究.
A hardfacing electrode containing boron and various alloy elements has been developed.
研制出一种含硼等多种合金元素的耐高温磨损堆焊焊条.
These include gusset plates welded to the flange.
这些包括焊接到翼缘上的节点板.
Therefore, it's strictly stipulated that air - spraying gun must be used fors.
因此, 严格规定了棱角、拐角、边缘和角接焊缝处等部位应使用空气喷枪喷涂.
Small rectangular backup bars were used to fabricate the web - bottom flange connection.
在腹板与下翼缘的施焊中使用小矩形挡板.
In welding zone the lath shape microstructure reduces, and equiaxed microstructure increases.
焊缝区在经过长时运行后板条状组织减少, 等轴状组织增多.
Delamination caused by electrical - over - stress ( EOS ) and moisture expansion during reflow soldering have shown different delamination patterns.
由过电应力 ( EOS ) 和再流焊中的水汽膨胀引起的分层会显示出不同的失效模式.
Design inductive heating & welding machine under the consideration of EMC regulation?
在考虑到EMC规则的情况下如何来设计感应加热设备和焊机?

|<<<1 234 5 >>>|