螺母用英语怎么说？

螺母

• [luó mǔ]
  nut，blind nut，cap nut，cover nut

例句

• She has invented a nifty little gadget for undoing stubborn nuts and bolts. 她发明了一种灵巧的小工具用来松开紧固的螺母和螺栓。
• The machines start to wear down, they don't make as many nuts and bolts as they used to... 机器开始出现磨损，螺母和螺钉的产量不如从前了。
• The machines start to wear down, they don't make as many nuts and bolts as they used to. 机器开始出现磨损，螺母和螺钉的产量不如从前了。
• Stainless steel bolts and nuts shall be tightened on manhole covers. 人孔盖使用不锈钢螺栓和螺母拧紧.
• Tighten valve adjusting screw locknut to 27 N · m ( 20 lb - ft ). 将气门调节螺丝防松螺母拧紧至27牛顿·米 ( 20磅 - 尺 ).
• Recheck clearance on all valves again after locknut is tightened. 防松螺母拧紧后,再对所有气门的间隙重新检查一次.
• Recheck clearance again after tightening locknut . Readjust clearance as necessary. 拧紧防松螺母后,再一次检查间隙,视需要重新调节间隙.
• There are lots of advantages by cold extrusion for straight knurl nut in a single process. 直纹滚花螺母采用冷挤压一次成形新工艺,成效显著.
• Manufacture LIFTING EYEBOLT , HIGH STRENGTH HEX NUTS , T - BOLT, U - BOLT and SPECIAL FASTENERS. 制造吊环螺丝,高强度螺母, T 型螺丝 、 U型螺丝等非标螺丝.
• Insert the pin into the collet and tighten the collet nut. 把小棒插入夹头,拧紧夹头螺母.

词组搭配

• 螺母车床
  nut lathe
• 螺母成形机
  nut shaping machine
• 螺母冲孔
  nut piercing
• 螺母垫圈
  nut collar
• 螺母锻压机
  nut former
• 螺母锻造机
  nut forging machine
• 螺母攻丝机
  tapper; nut tapping machine
• 螺母护圈
  nut retainer
• 螺母机
  nut machine
• 螺母夹
  nut clamp
• 螺母锁紧
  nut check; nut lock; nut locking
• 螺母锁紧垫圈
  nut lock washer
• 螺母锁紧装置
  nut locking device
• 螺母攻丝
  tap

英汉词典释义

• [luó mǔ]
  nut; blind nut; cap nut; cover nut; screw nut; jam nut; lock nut; screwed cap

汉语词典释义

• 词语 螺母
  拼音 luó mǔ
  解释 (名)组成螺栓的配件.中心有圆孔,孔有螺纹,跟螺钉的螺纹相啮合,用来使两个零件固定在一起.也叫螺帽、螺丝母或螺丝帽.偏正式:螺(母.
  构成 偏正式：螺（母
  释义

  (名)组成螺栓的配件。中心有圆孔，孔有螺纹，跟螺钉的螺纹相啮合，用来使两个零件固定在一起。也叫螺帽、螺丝母或螺丝帽。