螺母 - 关于螺母的双语例句 - 螺母造句 - 语文书

为您找到14个与“螺母”相关的双语例句：

She has invented a nifty little gadget for undoing stubborn nuts and bolts.
她发明了一种灵巧的小工具用来松开紧固的螺母和螺栓。
The machines start to wear down, they don't make as many nuts and bolts as they used to...
机器开始出现磨损，螺母和螺钉的产量不如从前了。
The machines start to wear down, they don't make as many nuts and bolts as they used to.
机器开始出现磨损，螺母和螺钉的产量不如从前了。
Stainless steel bolts and nuts shall be tightened on manhole covers.
人孔盖使用不锈钢螺栓和螺母拧紧.
Tighten valve adjusting screw locknut to 27 N · m ( 20 lb - ft ).
将气门调节螺丝防松螺母拧紧至27牛顿·米 ( 20磅 - 尺 ).
Recheck clearance on all valves again after locknut is tightened.
防松螺母拧紧后,再对所有气门的间隙重新检查一次.
Recheck clearance again after tightening locknut . Readjust clearance as necessary.
拧紧防松螺母后,再一次检查间隙,视需要重新调节间隙.
There are lots of advantages by cold extrusion for straight knurl nut in a single process.
直纹滚花螺母采用冷挤压一次成形新工艺,成效显著.
Manufacture LIFTING EYEBOLT , HIGH STRENGTH HEX NUTS , T - BOLT, U - BOLT and SPECIAL FASTENERS.
制造吊环螺丝,高强度螺母, T 型螺丝、 U型螺丝等非标螺丝.
Insert the pin into the collet and tighten the collet nut.
把小棒插入夹头,拧紧夹头螺母.
Abnormity nut need three sets of mould take shape.
异形螺母需要三副模具才能成形.
...nuts and bolts that haven't been tightened up.
没有拧紧的螺母和螺栓
If you want to repair the wheels you just undo the four nuts.
如果你想修理轮子，只需拧开这4个螺母就行了。
Remove wheelnuts, let down tyre, put on spare.
拧下车轮螺母，放掉车胎的气，换上备用胎。