合金 - 关于合金的双语例句 - 合金造句 - 语文书

为您找到118个与“合金”相关的双语例句：

At least 3 years of Aluminium building products experience on estimations.
从事铝合金建筑产品工作至少3年.
Haynes then went on to invent the muffler and different metal alloys.
然后,海恩斯接着又发明了消音器及各种不同的金属合金.
Special alloys: varnished or satiny alloy with soft and refined colour modulations.
特殊合金: 漆皮或经过色彩调制并且光滑柔软的合金.
A number of metals and alloys, how ever , are difficult to silver - solder and require special procedures.
但是有许多金属和合金是难于银焊的,因此需要采用专门的工艺方法.
The study demonstrates that the laser - MIG hybrid welding is an effective welding process for magnesium alloy.
因而激光?MIG复合焊接是镁合金焊接的一种有效方法.
Al - alloys have special requirements on MIG welding due to their unique physical and chemical properties.
铝合金因其独特的物理、化学性能对MIG焊有特殊的要求.
The microstructural evolution of semisolid AZ 91 alloy by SIMA process was investigated.
研究了AZ91镁合金的SIMA法半固态组织演变.
The microstructure and microhardness of ths laser nulted Fe - Sb alloys were studied.
研究了激光表面熔化Fe-Sb合金的显微组织和显微硬度.
The V - N microalloy steel with yield strength of 550 MPa is produced by EAF - CSP route.
目前,在EAF-CSP 流程中通过V -N 微合金化技术可成功生产屈服强度为550MPa的高强度低合金钢.
ST 5 BZ TB 3 alloy is a metastable � � Ti alloy as fastener material in aerospace industry.
航天航空用紧固件材料TB3合金是一种亚稳定β钛合金.
Alloying elements will inhibit the formation of metastable phase.
添加合金元素将抑制亚稳相的形成.
The bond strength of Ni - P coating on Mg alloy AZ 91 D is studied with metalloscope, SEM, EDS.
利用金相显微镜、 SEM 、能谱仪(EDS),研究了镁合金AZ91D的化学镀Ni-P的结合强度.
In this paper the metallograph of BT 20 titanium alloy is analyzed.
本文首先分析了BT20钛合金的金相组织.
The criterion is helpful for rational alloying of maraging steels with lower Ni and Co contents.
这些为马氏体时效钢降镍钴和合理的合金化提供有益的看法.
Magnetically controlled cathod plasma sputtering technique was used to manufacture the plating manganin film.
用磁控溅射低温沉积镀膜技术制做锰铜薄膜,能够保持薄膜中锰、铜、镍成份的相对稳定和锰铜合金正六面三元固溶体金相结构的特性.
After the mandrel is melted, a thin layer of alloy remains on the propellant surface.
此心轴溶化之后, 在推进剂表面上留有一薄层的合金.
Semi - solid slurry of Y 112 alloy was cast by near liquidus semi - continuous ( NLSC ).
采用近液相线半连续多模铸造法制备出 Y112 铝合金半固态坯料.
The lampholder is made of aluminum alloy ability to absorb paint and it is corrosion resistant.
底座采用铝合金铸造,漆层附着力好,耐腐蚀.
When the plating exist defect, the gold - plating nickel - plating both promote the stress - corrosion fracture of Kovar alloy.
在镀层存在缺陷时, 镀金、镀镍层均促进柯伐合金的应力腐蚀开裂.
Keyless entry, privacy glass, and 16 - inch alloys are among the standard upgrades over the base Soul.
无钥匙进入, 隐私玻璃, 16英寸合金属于标准升级的基础灵魂.

|<<<123 4 5 >>>|