welding - 关于welding的双语例句 - welding造句

为您找到27个与“welding”相关的双语例句：

The laser - cladding techique for welding of and large workpieces is reported.
本文报导了激光熔敷法焊接异型件的新技术.
All skilled welding and fitting was done by regular employees.
全部技术性的焊接和装配活都由正式工人担任.
The welding conditions should always be neutral or slightly oxidizing.
焊接气氛必须永远保持中性或微氧化.
The welding is so smooth that you can hardly see where the sections of pipe are joined together.
这管子焊接得很光滑,你很难看出什么地方是焊接的.
At high temperature uses are: sintering, welding, hardening, sintering, tempering, Xu cold.
在高温下使用用途有: 烧结、焊接、淬火、烧成、回火、徐冷.
For surfacing welding on cold die and cutting tool.
冷冲模及切削刀具的堆焊.
This welding backing is specially designed for hand holes and manholes welding.
本衬垫适用于入孔,出孔的焊接使用.
New debuting analog thermostat welding machine, easy to operate.
新登场模拟式调温电焊台, 操作简单.
Some of the students are welding capacitors; the others resistors.
学生中的一些人在焊接电容, 另一些人在焊接电阻.
The welding of billets is a key technology in endless rolling process.
无头轧制过程中的关键技术是钢坯的焊接技术.
Fixtures are generally mechanical devices used to assist ma - chinking, assembly, inspection, welding, and other manufacturing operations.
工装夹具主要是机械制造如机加工, 装配, 检验, 焊接等的一种辅助机械部件.
Lawn mowers, snow blowers , small appliances, bicycles, even light welding.
刈草机, 扫雪机, 小型器具, 自行车, 甚至焊接东西,均在服务之列.
The study demonstrates that the laser - MIG hybrid welding is an effective welding process for magnesium alloy.
因而激光?MIG复合焊接是镁合金焊接的一种有效方法.
Al - alloys have special requirements on MIG welding due to their unique physical and chemical properties.
铝合金因其独特的物理、化学性能对MIG焊有特殊的要求.
In welding zone the lath shape microstructure reduces, and equiaxed microstructure increases.
焊缝区在经过长时运行后板条状组织减少, 等轴状组织增多.
Design inductive heating & welding machine under the consideration of EMC regulation?
在考虑到EMC规则的情况下如何来设计感应加热设备和焊机?
The deslagging of acid welding material is better than that of base welding material.
酸性焊材脱渣性优于碱性焊材.
Connection weld without welding slag, oils, derusting pass before brushing paint.
连接处焊缝无焊渣、油污、除锈合格后方可涂刷涂料.
Checking structure integrity of superstructure ( deckhouse ) after welding.
上层建筑焊后结构完整性检查.
The strip goes further after croping through next pinch rolls and stops waiting for welding.
带钢齐头剪切后经夹送辊送至焊机等待焊接.

12 >>>|

The laser - cladding techique for welding of and large workpieces is reported.

All skilled welding and fitting was done by regular employees.

The welding conditions should always be neutral or slightly oxidizing.

The welding is so smooth that you can hardly see where the sections of pipe are joined together.

At high temperature uses are: sintering, welding, hardening, sintering, tempering, Xu cold.

For surfacing welding on cold die and cutting tool.

This welding backing is specially designed for hand holes and manholes welding.

New debuting analog thermostat welding machine, easy to operate.

Some of the students are welding capacitors; the others resistors.

The welding of billets is a key technology in endless rolling process.

Fixtures are generally mechanical devices used to assist ma - chinking, assembly, inspection, welding, and other manufacturing operations.

Lawn mowers, snow blowers , small appliances, bicycles, even light welding.

The study demonstrates that the laser - MIG hybrid welding is an effective welding process for magnesium alloy.

Al - alloys have special requirements on MIG welding due to their unique physical and chemical properties.

In welding zone the lath shape microstructure reduces, and equiaxed microstructure increases.

Design inductive heating & welding machine under the consideration of EMC regulation?

The deslagging of acid welding material is better than that of base welding material.

Connection weld without welding slag, oils, derusting pass before brushing paint.

Checking structure integrity of superstructure ( deckhouse ) after welding.

The strip goes further after croping through next pinch rolls and stops waiting for welding.