shear - 关于shear的双语例句 - shear造句

为您找到28个与“shear”相关的双语例句：

The novel - flocculant poly - nucleate aluminum hydroxy silicate - sulphate ( PASS ) was prepared and polysilicic acid under non - high shear condition.
在非高剪切力条件下,将硫酸铝引入到聚合硅酸中合成了新型聚硅酸硫酸铝 ( PASS ) 絮凝剂.
Textbooks commonly denote shear stresses by the symbol and two subscripts.
教科书通常用符号和两个脚标表示剪应力.
Slitting knives are used to shear the fabric to a precise width.
横切刀被用来将布剪裁到精确的宽度.
The results showed that starch pastes owned pseudoplastic and the shear - thinning characteristics.
结果表明:所有的样品糊均呈现假塑性流体特征.
Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.
文摘: 斜刃剪切时,剪切力的大小与板料的宽度、厚度及斜刃倾角有关.
Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.
斜刃剪切时,剪切力的大小与板料的宽度、厚度及斜刃倾角有关.
There may be widespread changes in ground elevation as well as horizontal or shear displacements.
地面标高可能发生广泛的变动,也可能发生水平位移或剪切位移.
Shear fracturing effect is attributed to the fact that melt is atomized.
认为剪裂效应是熔体被雾化的根本原因.
Extensive through - thickness shear causes crack - tip necking.
大范围的穿透厚度剪切引裂纹顶端的颈缩.
Normally the shear velocity is about half of the compressional velocity.
一般地说横波速度大约是纵波速度的一半.
It is genetically a metamorphic deposit controlled by shear zone.
400℃,矿床属剪切带型中温变质热液成因.
Sheet Metal , Metalworking Guillotine , Shear, Bend Shear , New , Used, Machinery Sheet Metal.
采购产品金属板材, 金属加工(剪切, 弯曲)机械钣金.
The metallocene is summarized as strata, lithology, structure, and especially brittle - ductile shear zone.
该区金矿的控矿条件为地层岩性和构造, 特别是脆 - 韧性剪切带.
As compared with Shear Type KR Vessel , FWACTV raises the efficiency of agitated mixing.
与“剪切型”的KR法相比, 这种反应器提高了混合效率.
Objective To study and shear bond strength of resin - reinforced glass ionomer cement ( RGIC ) on orthodontic brackets.
目的探讨两种树脂加强型玻璃离子水门汀对托槽粘结强度的影响.
Indirect Methods: To measure the interface bond strength include the interlaminar shear strength test.
测量界面粘结强度的间接方法包括层间剪切强度试验.
Ambitious attempts to improve interlaminar shear strength have been made by Mueller Prosen and by Keogh.
米勒·普罗森还有基奥都对提高层间切变强度作了大胆的尝试.
The interfacial shear stress is a constant proportion of the bottom shear.
交界面的剪力与底部剪力之比是常数.
The paper analyes interation shear , fluid forming process , and discuss the ore forming mechanism.
并在此前提下提出了构造-流体-岩石相互作用的金成矿机理.
In general, the deformation of the model grille is a combination of axial and shear strains.
一般情况下, 模型栅格的变形是轴向应变和切向应变的组合.

12 >>>|

The novel - flocculant poly - nucleate aluminum hydroxy silicate - sulphate ( PASS ) was prepared and polysilicic acid under non - high shear condition.

Textbooks commonly denote shear stresses by the symbol and two subscripts.

Slitting knives are used to shear the fabric to a precise width.

The results showed that starch pastes owned pseudoplastic and the shear - thinning characteristics.

Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.

Shear force is interrelating with width and thickness of plate and obliquity of knife - edge.

There may be widespread changes in ground elevation as well as horizontal or shear displacements.

Shear fracturing effect is attributed to the fact that melt is atomized.

Extensive through - thickness shear causes crack - tip necking.

Normally the shear velocity is about half of the compressional velocity.

It is genetically a metamorphic deposit controlled by shear zone.

Sheet Metal , Metalworking Guillotine , Shear, Bend Shear , New , Used, Machinery Sheet Metal.

The metallocene is summarized as strata, lithology, structure, and especially brittle - ductile shear zone.

As compared with Shear Type KR Vessel , FWACTV raises the efficiency of agitated mixing.

Objective To study and shear bond strength of resin - reinforced glass ionomer cement ( RGIC ) on orthodontic brackets.

Indirect Methods: To measure the interface bond strength include the interlaminar shear strength test.

Ambitious attempts to improve interlaminar shear strength have been made by Mueller Prosen and by Keogh.

The interfacial shear stress is a constant proportion of the bottom shear.

The paper analyes interation shear , fluid forming process , and discuss the ore forming mechanism.

In general, the deformation of the model grille is a combination of axial and shear strains.