轴 - 关于轴的双语例句 - 轴造句 - 语文书

为您找到253个与“轴”相关的双语例句：

Minimum dimension from centerline of valve to handwheel when ordered without floorstand.
如果不订购地轴承架,则最小长度尺寸为阀门中心至手轮的长度.
The coordination of adenine substituted to the cental zinc leads to self assembly.
结果表明,腺嘌呤取代基与中心金属锌的轴向配位驱动了自组装.
Maple Hill East project Catalpol Park, west of a three - center and the provincial museum landscape axis.
项目东倚梓枫公园、西望三馆一中心和省府景观轴.
Elastic cardo is used to reduce the cost for repair and make install easy.
采用弹性轴节,安装、拆卸方便,维修费用低.
Cross cardan shaft is a kind of lifting gear.
十字万向轴是起重工具的一种.
Capturing the enemy - held towns is the pivot of our plans.
夺取敌人控制的城镇,是我们计画的轴心.
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
在发动机里, 机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上.
The camshaft rotates in phase with the crankshaft, but at half its speed.
凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半.
Casting for auto parts ( calliper, bracket, disc, pressure plate etc ), reerigerator and air conditioner compressor parts ( cylinders, crankshaft etc ), machinicalparts, construction parts , motorparts, pump parts etc.
汽车用铸件 ( 制动钳体、支架、制动盘、压盘等 ), 机械零件,冰箱、空调压缩机铸件 ( 缸体、曲轴等 ), 建筑工程用铸件, 电机零件, 水泵等.
The rotating slipring is insulated from the shaft by a laminated plastic bushing.
旋转滑环是用片状塑料衬套与轴绝缘的.
The fresh - air inlet was usually the crankcase breather cap.
新鲜空气进口一般是曲轴箱通气盖.
A ratchet mechanism transfers the thread from spool to bobbin.
一种棘齿装置把线从线轴转到梭心上。
Teenagers can go blading or ice skating.
年轻人可以去玩滚轴或者是溜冰.
Roller blading is very popular among young people in the city.
滚轴溜冰在城市青年中很流行.
Measurements included cycloplegic refraction , biometric axial length and optic disc stereo - photographs.
测量其屈光度、眼轴长及视神经之立体相片.
The program will design or check concrete columns for axial tension, compression and biaxial moments.
可以设计混凝土圆柱的轴向拉力, 压力和二轴力矩.
This theory can be extended to biaxial stress.
这个理论能推广到双轴应力.
Remove the bezel and rubber gasket from the motor output shaft.
从马达输出轴上拆卸玻璃框和橡皮垫圈.
Bevel gears: gears which connect two shafts at right angles.
伞齿轮: 连接直角相交两轴的齿轮.
The baseplate locates outside the handle, and has the rotary connection with handle through the sleeve.
垫板位于把手的外侧, 通过轴套与把手转动连接.

|<<<6 7 8 910>>>|